Doctop High quality stainless steel 304/316L self cleaning s_lefilter

Doctop High quality stainless steel 304/316L self cleaning s

Introduction: Automatic Pulse Jet Candle Filter Design features of automatic back flushing filter The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical stru...

We're here to help:
Easy ways to get the answers you need.

  • Product parameter
  • Adoptive standards
  • Features
  • Application
  • Inquiry

Product parameter:

Doctop High quality stainless steel 304/316L self cleaning scrapped type filter housing DFM/DFG# series20170815

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention

Single filter flow(max) 200m3/h
Filtration range 25-400 micron(130 micron for irrigation)
Working pressure(Min) 0.2Mpa
Working pressure(Max) 1.6Mpa(customized is available)
Adjustable flushing time 10-200 seconds
Power supply 220 v / 50 Hz ,DC12V
Control modes Pressure difference/time/manual/PLC(optional)
Shell material Carbon steel/304 stainless steel/316L(optional)
Screen material SS sintered mesh

Models  Inlet/outlet D(inch) D(mm) Screen areas(cm2) Flow rate(m3/h) Backwash(m3/h) D1(inch) X(mm) Y(mm) H(mm) Weight(kg)
DLAF-202S 2 50 1630 30 6 10 177 174 625 36
DLAF-203 3 75 1100 40 6 10 192 188 495 34
DLAF-203S 3 75 1630 50 6 10 192 188 640 36
DLAF-204 4 100 1630 80 6 10 220 210 650 50
DLAF-204S 4 100 3000 100 20 10 220 315 890 72
DLAF-206 6 150 4500 130 20 10 220 400 1095 86
DLAF-208 8 200 5780 200 20 16 305 450 1190 161

Adoptive standards:

Doctop High quality stainless steel 304/316L self cleaning scrapped type filter housing DFM/DFG# series20170815

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention

Single filter flow(max) 200m3/h
Filtration range 25-400 micron(130 micron for irrigation)
Working pressure(Min) 0.2Mpa
Working pressure(Max) 1.6Mpa(customized is available)
Adjustable flushing time 10-200 seconds
Power supply 220 v / 50 Hz ,DC12V
Control modes Pressure difference/time/manual/PLC(optional)
Shell material Carbon steel/304 stainless steel/316L(optional)
Screen material SS sintered mesh

Models  Inlet/outlet D(inch) D(mm) Screen areas(cm2) Flow rate(m3/h) Backwash(m3/h) D1(inch) X(mm) Y(mm) H(mm) Weight(kg)
DLAF-202S 2 50 1630 30 6 10 177 174 625 36
DLAF-203 3 75 1100 40 6 10 192 188 495 34
DLAF-203S 3 75 1630 50 6 10 192 188 640 36
DLAF-204 4 100 1630 80 6 10 220 210 650 50
DLAF-204S 4 100 3000 100 20 10 220 315 890 72
DLAF-206 6 150 4500 130 20 10 220 400 1095 86
DLAF-208 8 200 5780 200 20 16 305 450 1190 161

Features:

Doctop High quality stainless steel 304/316L self cleaning scrapped type filter housing DFM/DFG# series20170815

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention

Single filter flow(max) 200m3/h
Filtration range 25-400 micron(130 micron for irrigation)
Working pressure(Min) 0.2Mpa
Working pressure(Max) 1.6Mpa(customized is available)
Adjustable flushing time 10-200 seconds
Power supply 220 v / 50 Hz ,DC12V
Control modes Pressure difference/time/manual/PLC(optional)
Shell material Carbon steel/304 stainless steel/316L(optional)
Screen material SS sintered mesh

Models  Inlet/outlet D(inch) D(mm) Screen areas(cm2) Flow rate(m3/h) Backwash(m3/h) D1(inch) X(mm) Y(mm) H(mm) Weight(kg)
DLAF-202S 2 50 1630 30 6 10 177 174 625 36
DLAF-203 3 75 1100 40 6 10 192 188 495 34
DLAF-203S 3 75 1630 50 6 10 192 188 640 36
DLAF-204 4 100 1630 80 6 10 220 210 650 50
DLAF-204S 4 100 3000 100 20 10 220 315 890 72
DLAF-206 6 150 4500 130 20 10 220 400 1095 86
DLAF-208 8 200 5780 200 20 16 305 450 1190 161

Application:

Doctop High quality stainless steel 304/316L self cleaning scrapped type filter housing DFM/DFG# series20170815

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention

Single filter flow(max) 200m3/h
Filtration range 25-400 micron(130 micron for irrigation)
Working pressure(Min) 0.2Mpa
Working pressure(Max) 1.6Mpa(customized is available)
Adjustable flushing time 10-200 seconds
Power supply 220 v / 50 Hz ,DC12V
Control modes Pressure difference/time/manual/PLC(optional)
Shell material Carbon steel/304 stainless steel/316L(optional)
Screen material SS sintered mesh

Models  Inlet/outlet D(inch) D(mm) Screen areas(cm2) Flow rate(m3/h) Backwash(m3/h) D1(inch) X(mm) Y(mm) H(mm) Weight(kg)
DLAF-202S 2 50 1630 30 6 10 177 174 625 36
DLAF-203 3 75 1100 40 6 10 192 188 495 34
DLAF-203S 3 75 1630 50 6 10 192 188 640 36
DLAF-204 4 100 1630 80 6 10 220 210 650 50
DLAF-204S 4 100 3000 100 20 10 220 315 890 72
DLAF-206 6 150 4500 130 20 10 220 400 1095 86
DLAF-208 8 200 5780 200 20 16 305 450 1190 161

Please fill in your procurement needs and contact information