Automatic Pulse Jet Candle Filter

Introduction: Automatic Pulse Jet Candle Filter Design features of automatic back flushing filter The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical stru...

We're here to help:
Easy ways to get the answers you need.

  • Product parameter
  • Adoptive standards
  • Features
  • Application
  • Inquiry

Product parameter:

Automatic Pulse Jet Candle Filter

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention
Applicable Liquid Water and liquid of low viscosity(<40cps), contaminant<300ppm
Lowest Working DP Differential pressure between the outlet and discharging outlet >0.15MPa
Filtration Rating 50-2000μm
Design Pressure Class 0.6MPa/1.0MPa/1.6MPa/2.0MPa
Design Temperature 0-95°C
Flowrate Range 17—8000m³/h
Filter Area 4970cm²-89530cm²
Self-cleaning DP 0.05MPa—0.07MPa
Control System parallel control of differential pressure and time
DP Instrument Differential pressure transmitter, differential pressure switch
Gear Motor 120W, three phase, 380V, protection class IP55, CCWU
Inlet and outlet size 2"—24"
Connection Standard flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible)
Filter Element V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2
Wet Part Material 304/316L/CS, special material available (such as 904L,duplex S.S.)
Inner Lining Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Housing Sealing Material NBR(Standard/VITON(FKM)
Discharging Valve Pneumatic stainless steel valve or butterfly valve, protection class IP65
Contact information:
Name:Steven
Skype/Email:sales07@lefilter.com
Phone/WhatsApp:0086-18568229226

Adoptive standards:

Automatic Pulse Jet Candle Filter

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention
Applicable Liquid Water and liquid of low viscosity(<40cps), contaminant<300ppm
Lowest Working DP Differential pressure between the outlet and discharging outlet >0.15MPa
Filtration Rating 50-2000μm
Design Pressure Class 0.6MPa/1.0MPa/1.6MPa/2.0MPa
Design Temperature 0-95°C
Flowrate Range 17—8000m³/h
Filter Area 4970cm²-89530cm²
Self-cleaning DP 0.05MPa—0.07MPa
Control System parallel control of differential pressure and time
DP Instrument Differential pressure transmitter, differential pressure switch
Gear Motor 120W, three phase, 380V, protection class IP55, CCWU
Inlet and outlet size 2"—24"
Connection Standard flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible)
Filter Element V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2
Wet Part Material 304/316L/CS, special material available (such as 904L,duplex S.S.)
Inner Lining Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Housing Sealing Material NBR(Standard/VITON(FKM)
Discharging Valve Pneumatic stainless steel valve or butterfly valve, protection class IP65
Contact information:
Name:Steven
Skype/Email:sales07@lefilter.com
Phone/WhatsApp:0086-18568229226

Features:

Automatic Pulse Jet Candle Filter

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention
Applicable Liquid Water and liquid of low viscosity(<40cps), contaminant<300ppm
Lowest Working DP Differential pressure between the outlet and discharging outlet >0.15MPa
Filtration Rating 50-2000μm
Design Pressure Class 0.6MPa/1.0MPa/1.6MPa/2.0MPa
Design Temperature 0-95°C
Flowrate Range 17—8000m³/h
Filter Area 4970cm²-89530cm²
Self-cleaning DP 0.05MPa—0.07MPa
Control System parallel control of differential pressure and time
DP Instrument Differential pressure transmitter, differential pressure switch
Gear Motor 120W, three phase, 380V, protection class IP55, CCWU
Inlet and outlet size 2"—24"
Connection Standard flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible)
Filter Element V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2
Wet Part Material 304/316L/CS, special material available (such as 904L,duplex S.S.)
Inner Lining Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Housing Sealing Material NBR(Standard/VITON(FKM)
Discharging Valve Pneumatic stainless steel valve or butterfly valve, protection class IP65
Contact information:
Name:Steven
Skype/Email:sales07@lefilter.com
Phone/WhatsApp:0086-18568229226

Application:

Automatic Pulse Jet Candle Filter

Design features of automatic back flushing filter
 
   The SS cartridge automatic backwash filter adopts automatic-cleaning and internal mechanical structure,realize the complete function of back flushing,which could completely remove the intercepted impurities on the screen,cleaning without dead ends with flux attenuation,which ensure the filtration efficiency and long service lifespan.
 
The filtration device adopts stainless steel 304 and SS316L as the wedge screen,with high strength, high precision,corrosion resistance,the filtration degree could reach 25 micros.
 
Few fragile components,no consumptive material,low cost for maintenance and easy management.
 
Control system is sensitive and accurate operation,in this case, we could flexible adjust pressure difference and time setting as per the different source of raw water and filtration degree.
 
During the processing of back flushing,all screens will be back flushed one by one,which could ensure the screen is safe and high efficiency,and will not affect other screens to continue filtering.
 
   This filter is of compact and reasonable design,small occupation and flexible and convenient for installation and moving.
attention
Applicable Liquid Water and liquid of low viscosity(<40cps), contaminant<300ppm
Lowest Working DP Differential pressure between the outlet and discharging outlet >0.15MPa
Filtration Rating 50-2000μm
Design Pressure Class 0.6MPa/1.0MPa/1.6MPa/2.0MPa
Design Temperature 0-95°C
Flowrate Range 17—8000m³/h
Filter Area 4970cm²-89530cm²
Self-cleaning DP 0.05MPa—0.07MPa
Control System parallel control of differential pressure and time
DP Instrument Differential pressure transmitter, differential pressure switch
Gear Motor 120W, three phase, 380V, protection class IP55, CCWU
Inlet and outlet size 2"—24"
Connection Standard flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible)
Filter Element V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2
Wet Part Material 304/316L/CS, special material available (such as 904L,duplex S.S.)
Inner Lining Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Housing Sealing Material NBR(Standard/VITON(FKM)
Discharging Valve Pneumatic stainless steel valve or butterfly valve, protection class IP65
Contact information:
Name:Steven
Skype/Email:sales07@lefilter.com
Phone/WhatsApp:0086-18568229226

Please fill in your procurement needs and contact information