0.6 MPa / 1.0 MPa Automatic Back Flushing Filter Self Cleani

To customer detail

01. What is the capacity (m3/hour)you required for this equipment?

 

02. What is the material for this bag filter?

 

Stainless steel (SS304/SS316)?

 

03. What is the working pressure for it?

 

04. What is the filtration degree?

 

10 micron or 200 micron?

Applicable Liquid	Water and liquid of low viscosity(<40cps), contaminant<300ppm
Lowest Working DP	Differential pressure between the outlet and discharging outlet >0.15MPa
Filtration Rating	50-2000μm
Design Pressure Class	0.6MPa/1.0MPa/1.6MPa/2.0MPa
Design Temperature	0-95°C
Flowrate Range	17—8000m³/h
Filter Area	4970cm²-89530cm²
Self-cleaning DP	0.05MPa—0.07MPa
Control System	parallel control of differential pressure and time
DP Instrument	Differential pressure transmitter, differential pressure switch
Gear Motor	120W, three phase, 380V, protection class IP55, CCWU
Inlet and outlet size	2"—24"
Connection Standard	flange,HG20592-2009(Standard Design), HG20615-2009(ANSI B16.5 compatible)
Filter Element	V-SLOT series slotted screen, material 316L/SuperDuplex/Ti2
Wet Part Material	304/316L/CS, special material available (such as 904L,duplex S.S.)
Inner Lining	Epoxy, PA11 for CS Housing or special anti-corrosion requirement
Housing Sealing Material	NBR(Standard/VITON(FKM)
Discharging Valve	Pneumatic stainless steel valve or butterfly valve, protection class IP65

 

Automatic Back-flushing Filter is a new generation self-cleaning filtration system independently designed by, it is integrated with a number of slotted filter elements. When the filter elements are clogged, a specially designed back-flushing arm will clean the elements one by one. As the high-end self-cleaning filter, it is especially designed for customers who take good quality and high eliability into consideration firstly .The filter consists of world-class top quality crucial parts, such as filter element, gear motor, control system, etc..

 Automatic Back-flushing Filter can remove the solid particles from various water resource and low viscosity liquid (e.g. machining coolant ). It makes the fluid meet cleanness requirement and protects downstream key equipments from clogging, abasing and fouling. It increases the key equipment running efficiency and service life. XF Filter automatically works continuously on-line and reduces the downtime cost, maintenance cost and labor cost. Automatic Back-flushing Filter is the advanced solution for the self-cleaning filtration of water and low viscous liquids.