Gas Turbine Air Intake Filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally these are made of mixture of polyester & cellulose and Nanofiber media. These media have much better pleat ability & dimensional stability.

Dimension of gas turbine air inlet filter:

Cylindrical:
12.75” (324mm) O.D. X 26.00” (660mm) Long X 8.38” (213mm) I.D.

Conical:
17.50” (445mm) O.D. (large end),and 12.75” (324mm) O.D. (small end) X 26.00” (660mm) long

Top end cap:
Electrical galvanized—Open

Bottom end cap:
Electrical galvanized—Closed on cylindrical, Open on Conical

Gasket:
High quality rubber gasket

Outer & Inner Liners:
Electrical galvanized, Expanded and Flattened Steel

Filter media description:

Imported Nanoweb filter media (Comparable to F9 per EN779)

Optional:80%Cellulose + 20%Polyester
100% Synthetic
100%Polyester

Features:

(1) It provides up to 25 percent more filtration air flow than other same-sized cartridge.
(2) Shorter and stiffer filter pleats help minimize dust entrapment simplify filter cleaning. By reducing the height of the pleats from the standard 2 inches to 1.5 inches, the pleat wall is less likely to collapse or bend, which can encapsulate dust and prevent it's expulsion.
(3) Oval-shaped cartridge filters have fewer areas of high velocity, resulting in a lower potentially for media abrasion and increased filter life.

Recommends replacement Lefilter: