Replace Pentair High flow water filter ALN10-60B

The introduction of Pentair high flow water filter:

Pentair high-flow filter element adopts 6.7" (170mm) large diameter structure and pleated form. The inner has a high-strength polypropylene support skeleton, and the outer support is a monolithic polypropylene skeleton and a polyester filter. The special structure enables It has a larger filtration area than the ordinary folded filter element, so it has the characteristics of large flow, corrosion resistance, high pressure resistance, and low cost when filtering high-purity reagents.

The Product Features of Pentair high flow water filter:

long lasting;
Low pressure difference, strong dirt holding capacity;
O-ring seals well,
The correct combination of pleat depth and number means lower pressure loss (longer service life), maximum dirt holding capacity, and reduced filter replacement interval

The Product parameters of Pentair high flow water filter:

Diameter: 6.7" (170mm)
Length: 20", 40", 60"
Filtration accuracy: 1μm, 3μm, 5μm, 10μm, 15μm, 20μm, 50μm, 70μm, 100μm
Maximum operating temperature: 82℃
Maximum working pressure difference: 3.44bar@82℃
Recommended pressure difference for filter element replacement: 2.4Bar, 20℃
Working pressure: 21bar-210bar
Sealing material: fluorine rubber ring, butadiene rubber

The Application areas of Pentair high flow water filter:

Metallurgy: used in the filtration of the hydraulic system of rolling mills and continuous casting machines and the filtration of various lubricating equipment.
Textile: Purification and uniform filtration of polyester melt in the process of drawing, degreasing and dewatering of compressed gas.
Machining equipment: lubrication system and compressed air purification of papermaking machinery, mining machinery, injection molding machine and large precision machinery, dust recovery and filtration of tobacco processing equipment and spraying equipment.

The product advantages of Pentair high flow water filter:

Large filtration area provides large flow, long life and high interception rate
The end cover and filter material are made of pure PP filter material by hot melt welding, which will not cause secondary pollution due to heating
Can provide 20", 40", 60" length filter element
The number of replacement of the filter element is small, which reduces the cost of filter element change
The installation of the filter element is fast, safe and convenient, which reduces labor costs.