equivalent P-all filter HFU660GF060H13
Introduction:equivalent P-all filter HFU660GF060H13 Xinxiang Lifeierte Filter Corp.Ltd is specialized in manufacture of filters filter equipmentand environment system . Spec . of equivalent P-all filter Filter Cartridge Part Number = HFU [1] [2] [3] Ta
We're here to help:
Easy ways to get the answers you need.
Product parameter:
equivalent P-all filter HFU660GF060H13
Xinxiang Lifeierte Filter Corp.,Ltd is specialized in manufacture of filters ,filter equipment,and environment system .
Spec . of equivalent P-all filter
Filter Cartridge Part Number = HFU [1] [2] [3]
Table 1
|
||
Code |
Filter Dimensions, nominal, diameter (mm/in) x length (mm/in) |
Suggested Maximum Water Flow Per Cartridge (lpm/gpm/mgd) |
620 |
152.4/6 x 508/20 |
663/175/0.25 |
640 |
152.4/6 x 1016/40 |
1325/350/0.5 |
660 |
152.4/6 x 1524/60 |
1900/500/0.7 |
680 |
152.4/6 x 2032/80 |
1900/500/0.7 |
|
Filter Cartridge Pressure Drop (typical) per Filter Length Shown2
Table 2
1 The test procedure used is an adaptation of ISO 4572, modified to determine the micron size above which particles are quantitatively removed.
2 Multiply this value by the total system flow to determine the aqueous pressure drop. For fluids other than water, multiply this value by the fluid’s viscosity at the operating temperature in centipoise. This value is the pressure drop across the Ultipleat® High Flow filter(s) only; it must be added to the pressure drop contribution from the Ultipleat High Flow filter housing.
3 2 micron at 99% efficiency.
4 Precision evaluation of the 99.98% removal efficiency for these coarse grades is not possible with the ISO modified test procedure utilized. The removal efficiency was determined by the maximum spherical particle analysis.
Table 3
|
|
Code-Filter O-Ring |
Material |
H13 (standard for glass fiber and aramid fiber filters) |
Nitrile |
H13U5 |
Nitrile U-Cup |
J (standard for polypropylene filters) |
Ethylene propylene |
JU5 |
Ethylene propylene U-Cup |
H4 |
Silicone |
H |
Fluoroelastomer |
|
5U-Cup seal is standard for the 1 micron composite filter.
Please fill in your procurement needs and contact information