Working Principle
Reverse osmosis is a new modern technology for the treatment of pure water. The reverse osmosis element is used to improve the purity of the water and to remove impurities and salts contained in the water. Through the reverse osmosis membrane membrane on both sides of the pressure is different, by pressing the raw water through the reverse osmosis membrane, the salt concentration will be low to the concentration of salt in the direction of permeation, can reach the equilibrium state, is the osmotic pressure of the liquid. When the pressure on one side of the brine contains for the other side of the osmotic pressure, it will occur in the opposite direction of the flow, and the reverse osmosis process is produced.
Technical parameters
Filtration accuracy (μm): 0.0001Desalination rate: up to 99.8%
Inlet water pressure: 0.2-4MpaWater production: 0.5-50 (m3/H)
Source water hardness: < 10mmol/LDischarge water hardness: ≤0.03mmol/L
Process selection: single-stage reverse osmosis, double-stage reverse osmosis, stainless steel reverse osmosis equipment
Type: Engineering type, Industrial type, Business type
Can be customized according to different working conditions
| Model Number | Water production m³/H | Salt content of produced water mg/g | Recovery rate % | Reference equipment size m |
|---|
| LF-TW-0.5 | 0.5 | 300 TDS influent, 10 TDS produced water | 50%-60% | 1.4*0.55*1.5 |
| LF-TW-1 | 1 | 300 TDS influent, 10 TDS produced water | 50%-60% | 1.7*0.65*1.6 |
| LF-TW-2 | 2 | 300 TDS influent, 10 TDS produced water | 50%-70% | 2.5*0.75*1.4(Host) |
| LF-TW-3 | 3 | 300 TDS influent, 10 TDS produced water | 60%-70% | 1.6*0.9*1.6(Host) |
| LF-TW-4 | 4 | 300 TDS influent, 10 TDS produced water | 60%-70% | 2.8*0.9*1.4(Host) |
| LF-TW-5 | 5 | 300 TDS influent, 10 TDS produced water | 60%-70% | 2.8*0.9*1.6(Host) |
| LF-TW-6 | 6 | 300 TDS influent, 10 TDS produced water | 65%-75% | 2.8*0.9*1.6(Host) |
| LF-TW-10 | 10 | 300 TDS influent, 10 TDS produced water | 65%-75% | 2.8*0.9*2(Host) |
| LF-TW-15 | 15 | 300 TDS influent, 10 TDS produced water | 65%-75% | 4*0.9*2(Host) |
| LF-TW-20 | 20 | 300 TDS influent, 10 TDS produced water | 65%-75% | 5*0.9*2(Host) |
| LF-TW-25 | 25 | 300 TDS influent, 10 TDS produced water | 65%-75% | 6*0.9*2(Host) |
| LF-TW-30 | 30 | 300 TDS influent, 10 TDS produced water | 65%-75% | 7*0.9*2(Host) |
| LF-TW-40 | 40 | 300 TDS influent, 10 TDS produced water | 65%-75% | 6*1.4*1.8(Host) |
| LF-TW-50 | 50 | 300 TDS influent, 10 TDS produced water | 65%-75% | 6*1.4*2(Host) |
