PP microporous membrane folded filter 10 micron
Introduction:PP microporous membrane folded filter10 micron Product Desc
We're here to help:
Easy ways to get the answers you need.
Product parameter:
Product Description of micro filter cartridge:
The pp folding filter element is made of ultra-fine polypropylene fiber membrane and non-woven fabric or (silk mesh) inner and outer support layers. The center rod and end cover of the filter element shell are processed by hot-melt welding technology, without any glue, and no leakage. No secondary pollution.
The pleated filter element adopts the folding type, the membrane filtration area is large, the dirt holding capacity is large, the pressure difference is low, and the service life is long. The entire filter element is 100% pure PP material and has a wide range of chemical phase capacity.
Product Features of of micro filter cartridge
1.Folding, large membrane filtration area,
2.large dirty holding capacity
3.Low pressure drop
4.long service life
5.Overall filter made of 100% pure PP material, with a wide range of chemical compatibility
Optional for a wide filter accuracy.
|
Materials Of Construction |
Filter Media: |
Polypropylene Membrane |
|
Support Layers: |
Polypropylene |
|
|
Micron Rating: |
0.1, 0.20, 0.30, 0.45, 1.0, 3.0, 5.0, 10, 20, 50, 100 um |
|
|
Cage, Core, End caps: |
PP |
|
|
Seal Method: |
Thermal Bonded, No Adhesives |
|
|
O-rings/gaskets: |
Silicone, Nitrile, EPDM, Viton, Teflon |
|
|
Cartridge Dimensions |
Outer Diameter |
69 mm |
|
Inner Diameter |
33 mm |
|
|
Length |
5, 10, 20, 30, 40 Inch |
|
|
Filtration Area(m2) |
0.65 m2 per 10'' |
|
|
Operating Conditions |
Normal Operating Temp: |
Up to 60℃ (140℉) |
|
Max.Operating Temp: |
80℃ (172℉) at P≤1.0 bar (14psi) |
|
|
Max. Differential Pressure |
|
|
|
Normal Flow: |
4.2 bar (60 psi) at 25℃ (77℉) |
|
|
Reverse flow: |
2.1 bar (30psi) at 25℃ (77℉). |
|
|
PH Value compatibility: |
1-13 |
|
|
Sterilization: |
Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:15hours; |
|
|
Flush with hot water at 82℃(180℉) for 30 minutes, |
Typical Applications of of micro filter cartridge
Pharmaceutical industry: medicine liquid, cell debris, biological products filtration.
Chemical industry: Organic solvents, chemical reagents, ink, plating solution filtration.
Food industry: Drinking water, mineral water, soft drinks, beer, red wine, fruit wine filtration.
Electronics industry: pre filtration of reverse osmosis water system, deionized water system.
Air filtration: fermentation tank, vent filter of hold tank,ultrapure gas filtration.
Please fill in your procurement needs and contact information
