Sullair ai filter element 02250135-148

The introduction of Sullair air filter:

Sullair air filter air filter is an important protective barrier for Sullair air compressors. Air compressors must suck in a large amount of air during operation. If the air is not filtered, the suspended dust in the air will be sucked in. It will aggravate the abrasion of the machine. If larger particles enter, it may cause damage to the machine. The air filter can filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the air compressor. Therefore, the main function of the air filter is to filter the air inhaled in the air machine and increase the life of the lubricating oil (if the air inhaled by the air machine contains a lot of dust, the life of the lubricating oil will be shortened)

Features of Sullair Air Filter:

1. High filtration accuracy: wide range of filtration accuracy, d=0.5~1.2mm;
2. Long service life: It is composed of a stainless steel wedge-shaped strip filter and a high-quality carbon steel cylinder;
3. Low overall cost: no need to disassemble and replace the filter screen, with a service life of up to 20 years;
4. Simple operation and high efficiency: no need to connect the bypass, no need to disassemble the machine for cleaning, the fully automatic self-cleaning air filter element has a good filter recoil effect.
5. The advanced control system of the self-cleaning air filter element: the control system is high, and its working mode and operating state can be adjusted according to different water quality to improve its ability to adapt to water quality.
6. The air filter element is made of metal woven mesh, sintered at high temperature, it has high strength and stable structure. After sintering, it still maintains the three-dimensional mesh porous structure of the cotton mesh, with high porosity, large specific surface and uniform pore size distribution. It effectively overcomes the shortcomings of fragile powder sintering, small flow, and poor temperature and pressure resistance of filter paper and filter cloth. , The air filter element has excellent filtering performance and is an ideal high-temperature, corrosion-resistant, high-precision filter material.
​

The function of Sullair air filter:

The air filter used in the air intake system adopts a tangential air intake method and can handle very dirty air. The operator should frequently remove the dust particles accumulated in the dust exhaust valve of the rear cover of the air filter. When the pressure difference indicator on the filter shows red, it indicates that the flow resistance of the air filter is too large, and the main filter element should be maintained or replaced in time. In addition, the air filter is also equipped with a safety filter element, whose function is to provide temporary protection in a short time when the main filter element is damaged. The safety filter element usually does not require maintenance, but when the main filter element is replaced, it is replaced at the same time as the main filter element.
​

Company profile:

Xinxiang Lifeierte Filter Corp.,Ltd (Stock code:837936)is specialized in manufacture of filters ,filter equipment,and environment system . Located in Xinxiang City-the center of Filtration in China.Lefilter has superior R & D team, professional technical team,experienced overseas sales team and perfect after-sales service system.We Lefilter people will try our best to satisfy customers' requirements.The develop philosophy of LEFILTER is "To purify environment,To serve society,To manage faith fully and To oyrsye excellence"!What's more,there're advanced production line,test machine and R & D department.They also obtained certification like ISO9001, IQNet & CQM,SGS,CNEX etc.
User:
With more than 300 successful installations case, our customers come from: China, Canada, USA, Brazil, U.K., Netherlands, Belgium, Italy,Korea, Israel, Saudi Arab, Australia, New Zealand, Malaysia, Indonesia,Thailand and South Africa,ect. 

​

Factory shots:​

Company certification:

​

Packing&Shipping:

FAQ:

1.Are you a trading company or manufacturer? 
A:Manufacturer with factory. 
2.Do you Accept OEM service?
A:Yes! we can manufacture according to your requirement.
3.What´s your Delivery Time?
A:Normally within 1-7 working days after order confirmation. 
4.How do you pack products?
A:Normally,plastic bag inside and carton outside .We´ll do according to customers´ requirement. 
5.: Do you provide samples ? is it free or extra ? 
A: Yes, we could offer the sample for free but do not pay the cost of freight. 
​