The Cartridge Filter Housings plays a protective role in the liquid filtration system for the following equipment elements. It is often used for solid-liquid separation of various suspensions after sand filtration (coarse filtration) and before ultrafiltration or reverse osmosis. For liquid medicine filtration with high environmental requirements and high filtration accuracy, it ensures the water quality filtration accuracy and protects the membrane filter element from damage by large particles. When the filter medium is water, it is often used, Therefore, the security filter belongs to the fine filtration of water filter. The shell of the filter barrel is generally made of stainless steel. The inside of the filter barrel is made of tubular filter elements such as PP melt blown, Wire-wound cartridge, high flow cartridges, titanium filter element, activated carbon filter element, etc. When the filter element is used for filtering, the fluid medium under the effect of pressure makes the original liquid pass through the filter element, the impurities remain on the pipe wall, and the clean medium flows out through the filter element, so as to achieve the purpose of filtering.

technical parameters of Cartridge Filter Housings:

Design pressure: 0.6 ～ 1.6MPA

Design temperature: 5 ℃～ 100 ℃, if it exceeds 80 ℃, it shall be informed

Sealing type: O-ring seal

Sealing material: nitrile rubber, silica gel, fluorine rubber, and the standard configuration is silica gel sealing

Interface type: GB, HG, DIN, ANSI, JIS standard flange

Recommended replacement differential pressure: 2.0bar

Maximum replacement differential pressure: 2.4bar

Surface treatment: matte spray bead

Filtering precision: 1, 3, 5, 10, 20, 30, 40, 70, 90, 150 microns（ μ m) Etc.

Filter material: SS304, 316L, carbon steel rubber lining

Warmly welcome you visit to LEFILTER .