Replacement method and features & advantages of large flow water filter element

Lefilter2022-12-14 BACK TO LIST

1. Features of large flow water filter element

◆ Large flow rate of single filter element

◆ Low installation cost and low operation cost

◆ Small number of replacement filter elements

◆ 1 micron absolute filtration accuracy

◆ High quality special FDA filter material

◆Inside-in and out-out filtration method, all impurities are intercepted inside the filter element

◆ No metal skeleton, minimizing the loss caused by discarding

◆ U-shaped sealing groove ensures high filtration efficiency

2. Advantage

◆It allows high-flow media to pass through the filter material, which has the advantages of high efficiency, low pressure loss and long life.

◆The outside-in and inside-out structure of the high flow filter element makes it easy to replace the filter element, and at the same time keeps the pollutants intercepted outside the filter element.

◆There is a pp support frame inside the filter element, which can withstand a pressure difference of 0.245MPa at most.

◆The β value of the filter element is above 1000.

◆Multiple filter elements can be installed in the filter shell, which can be used in a wide flow range, whether it is started or continuous operation.

◆The filter element is durable, and the least and most economical filter can be configured.

3. Replacement method

How to replace the front three-stage filter element:

Water will usually overflow during this process, please prepare cleaning utensils such as water basins or towels:

a) Turn off the electroplating ball valve and the pressure barrel ball valve;

b) Open the gooseneck faucet to drain the residual water in the pipe;

c) After the water no longer flows out, use the filter housing wrench to open the filter housing with the filter element;

d) Take out the old high-flow filter element and install a new filter element of the same specification;

e) Apply lubricant to the black "O" ring on the top of the filter housing, and put the "O" ring into the groove in the filter housing.

f) In a vertical fashion, tighten the housing, avoiding displacement of the "O" ring as much as possible.

g) Open the electroplating ball valve and the pressure barrel ball valve.

Related Product Recommendations