Stainless Steel filter (Bag type)

Equipment introduction：Stainless Steel filter (Bag type)

Stainless steel bag filters range from single-bag, double-bag to multi-bag filters, all of which are closed filters, and their working principle is pressure filtration.

A complete bag filter system consists of three parts: filter container, support basket and filter bag.

Stainless steel bag filters range from single-bag, double-bag to multi-bag filters, all of which are closed filters, and their working principle is pressure filtration. A complete bag filter system consists of three parts: filter container, support basket and filter bag. The liquid to be filtered flows in from the top of the filter bag supported by the support basket, which makes the liquid evenly distributed over the entire filter surface, so that the flow distribution in the entire filter medium surface is consistent, without the negative effect of turbulence.

The size of the supporting mesh basket for industrial filtration is uniform, and it is made of high-strength stainless steel wire mesh with uniform aperture, which provides a large and smooth filtering surface for the bag filter system, thus showing the following characteristics:

1. The opening ratio of the supporting basket is high, which ensures the large flow rate and small volume of the filtration system;

2. The opening rate of the supporting basket is high, which also increases the actual use area of the filter bag and prolongs the service life;

3. The top-entry design makes the replacement of filter bags convenient and quick;

4. Top-entry design, evenly distributed streamlines make the impurities trapped in the filter bag medium evenly distributed;

5. The high-strength support basket effectively supports the filter bag to prevent fiber migration and ensure high filtration efficiency;

6. The high-strength support basket also ensures the high mechanical strength of the filter bag;

7. A special magnetic filter or activated carbon or diatomaceous earth can be installed in the filter bag to remove ferrous impurities or absorb organic matter;

8. The standard size support basket is suitable for all standard size filter bags, making the filter bags highly interchangeable;

9. Closed filter system, strong safety;

10. Filtration area: 0.25㎡;

11. Maximum working pressure: 1.0Mpa;

12. Filter cylinder diameter: 219mm;

13. Model: BFC-2;

14. Flow rate: 40T/H;

15. Material: SUS304;

16. Filtration area: 0. 5㎡;

17. Maximum working pressure: 1.0Mpa;

18. Filter cylinder diameter: 219mm