Self-cleaning filter

Lefilter2023-09-13 BACK TO LIST

Self-cleaning filter

Equipment introduction:

The water to be treated enters the body through the water inlet, and the impurities in the water are deposited on the stainless steel wedge net, thereby generating a pressure difference.

The pressure difference between the water inlet and outlet is monitored through the differential pressure switch. When the pressure difference reaches the set value, the electric controller sends a signal to the control valve and the drive motor to trigger the following actions: the motor drives the brush to rotate to clean the filter element, and at the same time the control valve is opened for cleaning. Sewage discharge, the entire cleaning process only lasts for tens of seconds. When the cleaning is over, the control valve is closed, the motor stops, the system returns to its initial state, and the next filtration process begins.

image

Technical parameter:


1.Work pressure:0.2-2.5Mpa

2.Operating temperature: ≤80°

3.Voltage: 380v 50hz

4.Backwashing water     consumption:≤2%

5.Filtration precision: 50-5000 microns

6.Filter cartridge material: 304 316L  QB2205

7.Tank material: Q253B, 304, 316,         316L, carbon steel lined with rubber

8.Cleaning brush material: 304 316L

9.Cleaning method: brush type

10.Cleaning time: 60s or adjustable

11.Control way: manual, automatic

image

Send Your Inquiry

whatsapp