High-flow filter element replacement method

Lefilter2023-09-15 BACK TO LIST


Replacement method of pre-three-stage filter element:


Water often overflows during this process, so prepare cleaning utensils such as basins or towels:


a) Turn off the electroplating ball valve and the pressure barrel ball valve; To purchase filter elements, find Hunan Kaijuda Technology Co., Ltd


b) Open the neck to drain the remaining water from the pipes;


c) After the water no longer flows out, use the filter shell wrench to open the filter shell equipped with the filter element;


d) Take out the old high-flow filter element and install the new filter element with the same specification;


e) Apply the black "O" ring above the filter housing, apply lubricant, and place the "O" ring into the groove in the filter housing.


f) In a vertical fashion, tighten the filter housing, trying to avoid displacing the "O" ring.


g) Open the electroplated ball valve and the pressure barrel ball valve.

Related Products Recommendation

Self-cleaning Filter

Cartridge Filter Housings 

Bag Filter Housing


Send Your Inquiry

whatsapp