Equipment Production
Softened water equipment, that is, equipment that reduces water hardness, mainly removes calcium and magnesium ions in the water. When the incoming water is deep well water or the water source is very hard, the function of using softened water equipment is to remove the calcium and magnesium ions in the water. , reducing calcium and magnesium ions in the water. Softened water equipment cannot reduce the total salt content in water during the process of softening water. It is widely used in hot water boiler systems, heat exchange systems, industrial cooling systems, central air conditioning systems and other water equipment systems.
Application scope
Industrial boilers, central air conditioners, heat exchangers, printing and dyeing and other industries
filter media
Calcium and magnesium ions in water
Working Principle
Softened water equipment is composed of a fully automatic water softening controller, a salt tank, a strong acid sodium ion cation resin, a resin tank (usually a stainless steel resin tank and a fiberglass resin tank), and water softener accessories. Through water flow and time control, instructions are sent to solenoid valves or multi-channel servo valves to complete the water supply and regeneration of softened water equipment. It is suitable for industrial boilers, cooling circulating water, steelmaking, steel rolling, large transformers, and domestic hot water. The most widely used hard water softening treatment equipment in boilers and other occasions.
Equipment advantages
Water softening equipment: let the raw water pass through the anion and cation converter to remove calcium, magnesium, sodium and other ions in the water, effectively preventing scale.
Easy to use: adopting fully intelligent settings, it can achieve unmanned operation and the working status can be directly observed on the control panel without professional guidance.
PE material salt box: made of high-quality polypropylene, the product is acid and alkali resistant, not easy to age, and has a long service life, ensuring that water quality testing complies with national drinking water standards.
Intelligent control: the softened water equipment realizes the automation of the ion exchange and resin regeneration process through the program control device. It does not require special personnel to operate and is easy to install.
Technical Parameters
Inlet water pressure: 0.18-0.6Mpa
Operation mode: automatic, manual
Regeneration mode: downstream, countercurrent
Working power supply: 220V/50Hz
Control method: time, flow
Equipment type: purification and softening equipment, single tank and single valve, double tank and double valve
Tank material: stainless steel, fiberglass, steel lined with plastic material
Save water and electricity: water production rate is over 98%
Can be customized according to different working conditions
Single tank single valve
The single-tank single-valve softening system refers to a resin tank, a multi-way valve, and a salt tank. The water output is stopped during system regeneration.
Double tank double valve
The double-tank double-valve system is composed of two resin tanks (main tank and auxiliary tank), hydraulic control valve, and salt tank.
Purification and softening equipment
Pre-purification of softened water An unavoidable problem with general well water is that it will contain a certain amount of sediment and other visible impurities (deep well water is relatively better). If a certain amount of sediment enters the softening tank and the resin is surrounded by sediment, then This will result in insufficient contact between the resin and raw water, thus affecting the softening effect. If the tank cannot be completely flushed out during backwashing, lumps may form. Therefore, if the raw water is well water, it is recommended to install a quartz sand filter before the softening filter to improve the quality of the inlet and outlet water of the softening filter.
